JETech Screen Protector for MacBook Pro 13-Inch (2016-2022, M1/M2) / MacBook Air 13-Inch (2018-2020, M1), Anti-Glare Film Matte, Anti-Fingerprint, 2-Pack
$13.99
In stock, Ship to United States only
Description
[Powerful Anti-Glare Feature] Processed with upgraded matte technology, effectively reduce glare, reflections and visual fatigue, providing a comfortable viewing experience even in strong light
[Wide Compatibility] Include 2-pack matte films. Designed to fit MacBook Pro 13 inch (2016-2022) and MacBook Air 13 inch (2018-2020)
[Fingerprint-Proof] With an oleophobic coating to prevent fingerprints, oil and smudges. Always maintain a clean screen environment for you
[Anti-Scratch] This premium PET anti-glare screen protector also protects the screen from daily scratches and abrasions
[Easy Installation] Just align and install the screen protector. It will perfectly adhere to the screen automatically in a few seconds and no air bubbles left
Contact Us
Nirmal –
Best for mac
On L. –
PROS:.Great matte/anti-glare finish. diffuses the light very finely and although it still causes some of the rainbow ‘graininess’ you usually get with matte finishes. it’s generally to a minimum and very tolerable. especially compared to the larger grain ones for iPad which uses the grittiness for Apple Pencil traction. (NB. Often online you can tell if the texture is fine enough to not interfere with the screen underneath by looking at images of windows/lights reflecting off the screen protector. the more blurred it is/ the harder it is to make out the outlines. the better it will look.).I love not being distracted by light reflections/ my own reflection on the screen when I’m working. and I find the matte finish gives a cleaner look and is more immersive than a shiny finish which is often marred by fingerprints..It’s very thin and I’ve not noticed any problems closing the screen or any signs of damages (I use a keyboard cover as well.).CONS:.The installation process:.- The biggest con is that the result is ENTIRELY dependent on your ability to apply it without any air bubbles / dust underneath. You do get 2 screen protectors and 2 install kits (alcohol wipe. cloth and sticker) and a squeegee. so you have 2 attempts to get it right. Instructions are vague one-liners on a printout. but try and follow them..Don’t do what I did on my first attempt. which is to peel off the whole back and try to place it in one go onto the screen. Unless your home is literally dust & lint free like TSMC’s microchip manufactory plant. you WILL get dust specs sticking to your screen protector the moment you peel the backing off due to the static electricity that’s generated in the process. Plus. even if you don’t get any dust sticking. when you go on to lining it up with your Macbook’s screen. the static will cause the edges you aren’t holding to keep magnetising to the screen at random places once you hold it close enough. making it really difficult to align..How I achieved a dust free installation:.- Wash your hands/make sure they aren’t sweaty or oily..- Lay your Macbook with the screen flat on the table and the keyboard/body pointing up..- Clean the screen (alcohol wipe –> cloth –> sticker to pick up dust). then with the backing still on align it to your screen..- Use 2 pieces of cellotape and tape the screen protector’s edge. do this on the edge with the pull tab for the backing (so now can fold on a hinge like a book (this was the left side for mine). this way it is aligned and you don’t have to worry about alignment when you take the backing off..- Peel the backing off until it’s roughly ? of the way off. folding the loose backing onto itself. then lower the exposed sticky side onto the screen making sure it’s taut against the cellotape..- When there is a speck of dust between the screen protector and the screen. no matter how hard you squeegee there will always be a bubble formed around the dust particle there. If you see any specs of dust. lift the screen protector up and grab it with the sticker (usually the dust is on the screen protector surface and not the laptop screen. so slide the sticker with the sticky side up and press the screen protector down where roughly the piece of dust was to grab it).- if you see an airbubble (without a dust particle trapped underneath). you can lift the screen protector up slightly to let the air bubble out then lower it slowly again (to save you the trouble of using a lot of force to press it out later and risk damaging your screen).- keep doing this and slowly work your way down. as you go you can retract more of the backing. this way you don’t have a lot of the sticky side exposed at once and decreases the likely hood of getting dust..- for the corners. as long as it hasn’t completely suctions onto the screen you can usually lift it up with a piece of tape to grab any dust particles
Angela –
Easy to use
Angela –
Easy to use
Ashutosh Rana –
It gives a matte finishing.. no fingerprints on screen after installing. U will love it.
Amna –
The screen looks so clear.
Vaishnavi –
This screen protector fits my MacBook Air 13.3 inch (2020) perfectly and it leaves no fingerprints. In terms of installation. there were step-by-step instructions inside which were easy to follow. They also provided wet wipes. a cleaning cloth and a dust-removal sticker to make sure your screen was clean. I placed the screen protector on and I only had around 3 air bubbles remaining which I removed using the card that this pack came with. I now have a protected Macbook screen and I still have an extra screen protector left 🙂
LH –
I liked the accessories to apply it easily and the instructions. There wasn’t a scuff on it. Great!
B –
Looks good on screen
Ewerton Neves –
The item is great but it can be tricky to install