[Compatibility] Exclusively fit iPad Pro 12.9-Inch 2022/2021/2020/2018 (6th/5th/4th/3rd Generation). Fit Models: A2378 / A2379 / A2461 / A2462 / A2069 / A2229 / A2232 / A2233 / A1876 / A1895 / A1983 / A2014 / A2436 / A2764 / A2437 / A2766. Please check back bottom of your iPad to find the model number
[Easy Installation] Come with an easy installation frame. Allow perfect alignment and quickly install the screen protector without leaving any air bubbles
[Anti-Scratch] Built with premium tempered glass up to 9H hardness (harder than a knife). Perfectly keep the screen highly resistant to daily scratches and abrasions
[HD & Highly Responsive] Ultra-clear screen protector preserves original resolutions of every photo and video. Also promise an accurate and quick response to every touch and tap
[Fingerprint-Proof] Effectively reduce fingerprints and oil residue thanks to a hydrophobic and oleophobic coating. Easy to clean and always maintain a clean screen environment
11 reviews for JETech Screen Protector for iPad Pro 12.9-Inch (2022/2021/2020/2018 Model, 6th/5th/4th/3rd Generation) with Easy Installation Frame, Tempered Glass Film, HD Clear, 2-Pack
Rated 5 out of 5
Lawrence –
JETech has proven why their products are applied on all of my Apple devices. The installation process is a breeze. thanks to the included frame. ensuring a perfect fit and easy install..It comes with a dusting sticker and wipe for dust removal. a standard step before applying any screen protector. Once you’ve wiped away the dust and applied the protector. it offers excellent screen protection and maintains great clarity and touch responsiveness..I highly recommend this screen protector for your iPad to guard against scratches!
Rated 5 out of 5
D. Palmer –
I’ve used JETech products for a while now. Almost every phone and tablet has ended up with their screen protectors. They are consistently of very high quality and offer a perfect viewing and touch experience – including use of the apple pencil. I’m so used to having one on my devices that without them they dont look right :).A word of caution though with tablet protectors. and especially the 12.9 Ipad Pro one. is they need to be applied while in a very clean. dust free. environment and the tablet has to be spotless. You then need to line up the protector carefully without touching the screen first…and apply slowly (ideally from the bottom up)..Removing the protector if not fully pressed down is possible but you can expect a finger nail mark on the underneath of the glass that will remain! I got lucky though this time!
Rated 4 out of 5
Dave H –
I struggle to install the screen initially. the dust remover didn’t seem to do the trick so I had to remove the first screen and try again with the second one. However. this was much easier (duff dust remover first time round maybe?) and now my iPad screen is perfect.
Rated 5 out of 5
Be_eS –
This is another good purchase for me from JETech..They deliver. as usual..Clear instruction. easinnes to apply and reapply if necessary..I’m glad that nowadays we get a frame to fit screen protectors properly (same for my phone)..You get the usual – bubble removal tool. microfibre cloth. dusters. wet wipe and instruction..The anti-glare is good and . after the installation. the responsivness to the touch or pencil is as good as without the protector. Which is great of course..I also pay attention to the hardness and the 9H that JETech provides is great.
Rated 5 out of 5
JW –
Screen protectors are never fun to try and install. this pack comes with a guide to help you position it correctly which makes it so much easier. especially given the size of a 12.9″ iPad..The iPad is responsive and works well with the screen protector installed. Would recommend this product.
Rated 5 out of 5
Lewis H –
Needed protection for my iPad screen as my old one ended up with tons of scratches. This one was easy to apply. does not leave bubbles underneath and seems very protective. I like how thin these screen protectors are. because they protect your screen but do not compromise the nice looks of your expensive iPad. I have had quite a few screen protectors by JETech in the past and one time I dropped my phone with one applied. The screen protector cracked but stopped my screen from breaking. So I am sure this would do the same if anything happened.
Rated 5 out of 5
Mark V-P –
Fitting screen protectors is never a fun job. especially on an iPad which is a much larger screen and more prone to issues. Thankfully. with the aligning frame included as well as the dust removal tool. bubble removal card. you can get a perfect. dust free fit (plus having a spare screen protector in case you do mess anything up is always handy)..So far. no issues with the fit. quality. or touch screen responsiveness. The protector was easy to install. with no dust/air bubbles (as long as you clean the screen well and install in a dust free environment).
Rated 5 out of 5
Craig Laws –
I recently had to replace my beloved iPad Pro 12.9″ after it developed a fault. so when the new one arrived I was in need of a new screen protector. I had one on the previous iPad. and considering the cost of the Pros I would suggest it’s a critical purchase..The Jetech screen protector twin pack obviously comes with two protectors plus a snap-on guide which is a must with these things. You snap that over the sides of your iPad and the application of the adhesive protector is then very straightforward. What is never straighforward is making sure the screen is absolutely free of any dust or hairs. In this household. with a border collie wandering around. no surface remains clean for longer than a coupe of seconds..Each of the two protectors comes with a cleaning kit. which includes a duster and a sticky pad to pick off any bits of dust. These are necessary as the tiniest spec will be noticable under the screen protector. The one I had on my previous iPad had a tiny spec in the top right corner. and even though it was outside of the visible screen. I could always see it. This time around. I got it on perfectly. There were a couple of small air bubbles that I was able to tease to the side of the screen and remove. but othewise the Jetech applied faultlessly..Having a twin pack is a great idea. just in case you totally mess the application up!
Rated 5 out of 5
Sad Muppet –
I have had/have more iPads than I probably need and have fitted a lot of screen protectors in my time – anytime I get a new device. I have to have a case and screen protector for it – It’s probably OCD or something but unless it’s got protection. I won’t use it. no matter how much I want to..So. in the box. you get 2 screen protectors. a decent sized screen wipe for each screen and decent sized cloths to use afterwards. the usual dust spec removers. instructions etc. Most importantly. a guiding frame for installation..Installation is a breeze – as long as the iPad isn’t in a case. which mine was. so out it was popped. Simply clean the screen. attach the frame. peel the backing off the protector and fit it into the frame. I always remove the backing as I insert it into the frame to minimise dust specs. Once done. use the squeegee to push any air bubbles out and basically job jobbed..One error in the instructions is it says Remove the front cover which on mine. wasn’t there to remove. But unlike other fittings I’ve had – no bubbles in the corners or the top. Somehow. I always got a slight lift/bubble in one corner or another – but either I’m getting really good at fitting them. or the frame really helps minimise this. I think it’s the frame personally..But as you get 2 protectors. it’s always handy to have one on standby should anything untowards happen – or maybe you and your other half have an iPad each where you can fit one on each. Either way. it’s probably a bit more expensive than some others. but when it fits this easily. I’m fine with it..As for the reflectiveness and being a finger print magnet – well. that’s pretty much all of this type of protector anyway – and anyway. a glasses wipe or spray cleans it off and your actual iPad screen is unscathed.
Rated 4 out of 5
Vinman666 –
This iPad screen protector uses the familiar JETech installation process of a plastic frame to surround the perimeter of the device to make alignment easier. This works well for alignment but removing specks of dust is as much of a pain as it always is..The protector has no detrimental effect on the clarity or contrast of the screen but is rather more reflective than the iPad’s normal screen. This is mainly noticeable when watching films/TV when your own reflection can be a distraction. I also found that the protector collects fingerprints far more than the base screen foes. or perhaps the greater reflectivity makes them show up more..In use. the response to finger or Apple Pencil is very good. I found that there is a very slight drag effect. hardly noticeable. This was actually useful when reading magazines that have a ‘swipe to view more images’ function. I normally find it hard to do this without just turning the page instead. but with the protector in place the feature worked as it should..There’s a trade-off in the protection afforded with the additional impact of fingerprints and reflections. These aren’t huge issue though and if you use the Pencil most of the time and rarely use the iPad for viewing films it won’t be a problem.
Contact Us
Lawrence –
JETech has proven why their products are applied on all of my Apple devices. The installation process is a breeze. thanks to the included frame. ensuring a perfect fit and easy install..It comes with a dusting sticker and wipe for dust removal. a standard step before applying any screen protector. Once you’ve wiped away the dust and applied the protector. it offers excellent screen protection and maintains great clarity and touch responsiveness..I highly recommend this screen protector for your iPad to guard against scratches!
D. Palmer –
I’ve used JETech products for a while now. Almost every phone and tablet has ended up with their screen protectors. They are consistently of very high quality and offer a perfect viewing and touch experience – including use of the apple pencil. I’m so used to having one on my devices that without them they dont look right :).A word of caution though with tablet protectors. and especially the 12.9 Ipad Pro one. is they need to be applied while in a very clean. dust free. environment and the tablet has to be spotless. You then need to line up the protector carefully without touching the screen first…and apply slowly (ideally from the bottom up)..Removing the protector if not fully pressed down is possible but you can expect a finger nail mark on the underneath of the glass that will remain! I got lucky though this time!
Dave H –
I struggle to install the screen initially. the dust remover didn’t seem to do the trick so I had to remove the first screen and try again with the second one. However. this was much easier (duff dust remover first time round maybe?) and now my iPad screen is perfect.
Be_eS –
This is another good purchase for me from JETech..They deliver. as usual..Clear instruction. easinnes to apply and reapply if necessary..I’m glad that nowadays we get a frame to fit screen protectors properly (same for my phone)..You get the usual – bubble removal tool. microfibre cloth. dusters. wet wipe and instruction..The anti-glare is good and . after the installation. the responsivness to the touch or pencil is as good as without the protector. Which is great of course..I also pay attention to the hardness and the 9H that JETech provides is great.
JW –
Screen protectors are never fun to try and install. this pack comes with a guide to help you position it correctly which makes it so much easier. especially given the size of a 12.9″ iPad..The iPad is responsive and works well with the screen protector installed. Would recommend this product.
Lewis H –
Needed protection for my iPad screen as my old one ended up with tons of scratches. This one was easy to apply. does not leave bubbles underneath and seems very protective. I like how thin these screen protectors are. because they protect your screen but do not compromise the nice looks of your expensive iPad. I have had quite a few screen protectors by JETech in the past and one time I dropped my phone with one applied. The screen protector cracked but stopped my screen from breaking. So I am sure this would do the same if anything happened.
Mark V-P –
Fitting screen protectors is never a fun job. especially on an iPad which is a much larger screen and more prone to issues. Thankfully. with the aligning frame included as well as the dust removal tool. bubble removal card. you can get a perfect. dust free fit (plus having a spare screen protector in case you do mess anything up is always handy)..So far. no issues with the fit. quality. or touch screen responsiveness. The protector was easy to install. with no dust/air bubbles (as long as you clean the screen well and install in a dust free environment).
Craig Laws –
I recently had to replace my beloved iPad Pro 12.9″ after it developed a fault. so when the new one arrived I was in need of a new screen protector. I had one on the previous iPad. and considering the cost of the Pros I would suggest it’s a critical purchase..The Jetech screen protector twin pack obviously comes with two protectors plus a snap-on guide which is a must with these things. You snap that over the sides of your iPad and the application of the adhesive protector is then very straightforward. What is never straighforward is making sure the screen is absolutely free of any dust or hairs. In this household. with a border collie wandering around. no surface remains clean for longer than a coupe of seconds..Each of the two protectors comes with a cleaning kit. which includes a duster and a sticky pad to pick off any bits of dust. These are necessary as the tiniest spec will be noticable under the screen protector. The one I had on my previous iPad had a tiny spec in the top right corner. and even though it was outside of the visible screen. I could always see it. This time around. I got it on perfectly. There were a couple of small air bubbles that I was able to tease to the side of the screen and remove. but othewise the Jetech applied faultlessly..Having a twin pack is a great idea. just in case you totally mess the application up!
Sad Muppet –
I have had/have more iPads than I probably need and have fitted a lot of screen protectors in my time – anytime I get a new device. I have to have a case and screen protector for it – It’s probably OCD or something but unless it’s got protection. I won’t use it. no matter how much I want to..So. in the box. you get 2 screen protectors. a decent sized screen wipe for each screen and decent sized cloths to use afterwards. the usual dust spec removers. instructions etc. Most importantly. a guiding frame for installation..Installation is a breeze – as long as the iPad isn’t in a case. which mine was. so out it was popped. Simply clean the screen. attach the frame. peel the backing off the protector and fit it into the frame. I always remove the backing as I insert it into the frame to minimise dust specs. Once done. use the squeegee to push any air bubbles out and basically job jobbed..One error in the instructions is it says Remove the front cover which on mine. wasn’t there to remove. But unlike other fittings I’ve had – no bubbles in the corners or the top. Somehow. I always got a slight lift/bubble in one corner or another – but either I’m getting really good at fitting them. or the frame really helps minimise this. I think it’s the frame personally..But as you get 2 protectors. it’s always handy to have one on standby should anything untowards happen – or maybe you and your other half have an iPad each where you can fit one on each. Either way. it’s probably a bit more expensive than some others. but when it fits this easily. I’m fine with it..As for the reflectiveness and being a finger print magnet – well. that’s pretty much all of this type of protector anyway – and anyway. a glasses wipe or spray cleans it off and your actual iPad screen is unscathed.
Vinman666 –
This iPad screen protector uses the familiar JETech installation process of a plastic frame to surround the perimeter of the device to make alignment easier. This works well for alignment but removing specks of dust is as much of a pain as it always is..The protector has no detrimental effect on the clarity or contrast of the screen but is rather more reflective than the iPad’s normal screen. This is mainly noticeable when watching films/TV when your own reflection can be a distraction. I also found that the protector collects fingerprints far more than the base screen foes. or perhaps the greater reflectivity makes them show up more..In use. the response to finger or Apple Pencil is very good. I found that there is a very slight drag effect. hardly noticeable. This was actually useful when reading magazines that have a ‘swipe to view more images’ function. I normally find it hard to do this without just turning the page instead. but with the protector in place the feature worked as it should..There’s a trade-off in the protection afforded with the additional impact of fingerprints and reflections. These aren’t huge issue though and if you use the Pencil most of the time and rarely use the iPad for viewing films it won’t be a problem.